Suitable for dealing with voltage grade 12/20kv,18/20kv,18/30kv single-core,three-core cross-linked cable terminal. Offering good mechanical, insulation and sealing protection.Advanced iniection process , Especially suitable for petroleum, chemical, mining .... flammable and explosive place.

Compatible cable: 26/35kV three core cross-linked polyethylene (XLPE) cable, with a cross-sectional area of 50-400mm ², complying with IEC 60502-4 and GB/T 12706 standards, designed specifically for indoor scenarios such as substations and data centers.

Suitable cable: 26/35kV three core cross-linked polyethylene (XLPE) cable, with a cross-sectional area of 50-400mm ², complying with IEC 60502-4 and GB/T 12706 standards, designed specifically for outdoor scenarios of offshore wind power, rail transit, and industrial high-voltage transmission and distribution.

Suitable cables: 21/31kV, 26/35kV single core cross-linked polyethylene (XLPE) cables, with a cross-sectional area of 50-400mm ², in compliance with IEC 60502-4 and GB/T 12706 standards, designed specifically for flammable and explosive scenarios in petroleum, chemical, mining, and other industries.

Suitable for connecting single core three core cross-linked power cables with voltage levels of 21/31.5KV and 26/35KV, serving the functions of sealing, insulation, and stress dissipation. Especially suitable for flammable and explosive places such as petroleum, chemical, mining, etc.

Compatible cable: 0.6/1kV dual-core low-voltage cable (phase line + neutral line), with a cross-sectional area of 10-300mm², conforming to IEC 60502-2 and GB/T 12706 standards, specially designed for industrial equipment, rail transit signal systems and renewable energy scenarios.

Compatible cable: 0.6/1kV dual-core low-voltage cable (phase line + neutral line), with a cross-sectional area of 10-300mm², conforming to IEC 60502-2 and GB/T 12706 standards, specially designed for industrial equipment, rail transit signal systems and renewable energy scenarios.

Suitable cable: 0.6/1kV five core low-voltage cable (3-core+neutral wire+ground wire), with a cross-section of 4-300mm ², in compliance with IEC 60502-2 and GB/T 12706 standards, designed specifically for building power distribution, industrial equipment, and renewable energy scenarios.

Suitable cable: 0.6/1kV dual core low-voltage cable (phase line+neutral line), with a cross-sectional area of 4-300mm ², in compliance with IEC 60502-2 and GB/T 12706 standards, designed specifically for building power distribution, industrial equipment, and renewable energy scenarios.

Suitable cable: 0.6/1kV dual core low-voltage cable (phase line+neutral line), with a cross-section of 10-300mm ², in compliance with IEC 60502-2 and GB/T 12706 standards, designed specifically for industrial equipment, rail transit signal systems, and renewable energy scenarios. Pre expanded silicone rubber sleeve (tensile ratio ≥ 600%), tightly wrapped around the cable by elastic shrinkage, suitable for irregular cross-sections

Suitable cable: 0.6/1kV three core low voltage cable (cross-section 25-400mm ²), compliant with IEC 60502-2 and GB/T 12706 standards, designed specifically for building power distribution, industrial equipment, and renewable energy scenarios. Propane spray gun low-temperature shrinkage (90-120 ℃), single installation time ≤ 2 minutes, efficiency increased by 75% compared to cold shrinkage technology;

Suitable cable: 0.6/1kV four core low-voltage cable (3-core+neutral wire+ground wire), with a cross-section of 25-400mm ², in compliance with IEC 60502-2 and GB/T 12706 standards, designed specifically for building power distribution, industrial equipment, and renewable energy scenarios.