This product is a 1kV four core cold shrink intermediate joint designed specifically for low-voltage multi-core cables. It uses cold shrink technology to achieve heating free installation and is matched with EPDM material to ensure IP66 waterproof, dustproof, oil and corrosion resistance performance. Suitable for scenarios such as factory equipment distribution and building power systems.

Suitable for dealing with voltage grade 3.6/6kv,6/6kv,6/10kv,8.7/10kv,8.7/15kv single-core.three-core cross-linked cable terminal.It offering good mechanical, insulation and sealing protection. Especially suitable for petroleum, chemical, mining ...... flammable and explosive places.

20KV series cold shrink power cable terminal product name and model applicable conductor cross-sectional area (mm ²) 20KV single core cold shrink indoor terminal

Compatible cable: 26/35kV single core cross-linked polyethylene (XLPE) cable, with a cross-sectional area of 50-400mm ², complying with IEC 60502-4 and GB/T 12706 standards, designed specifically for indoor scenarios such as substations and data centers.

Compatible cable: 26/35kV three core cross-linked polyethylene (XLPE) cable, with a cross-sectional area of 50-400mm ², complying with IEC 60502-4 and GB/T 12706 standards, designed specifically for indoor scenarios such as substations and data centers.

Suitable cable: 26/35kV three core cross-linked polyethylene (XLPE) cable, with a cross-sectional area of 50-400mm ², complying with IEC 60502-4 and GB/T 12706 standards, designed specifically for outdoor scenarios of offshore wind power, rail transit, and industrial high-voltage transmission and distribution.

Compatible cable: 0.6/1kV dual-core low-voltage cable (phase line + neutral line), with a cross-sectional area of 10-300mm², conforming to IEC 60502-2 and GB/T 12706 standards, specially designed for industrial equipment, rail transit signal systems and renewable energy scenarios.

It is suitable for 0.6/1 KV PVC,XLPE,rubber insulation single-core,two-core,three-core,four-core,five-core electric cable.Suitable cable: 0.6/1kV three core low voltage cable (3-core+neutral wire), with a cross-section of 4-300mm ², in compliance with IEC 60502-2 and GB/T 12706 standards, designed specifically for building power distribution, rail transit, and industrial equipment.

Suitable cable: 0.6/1kV three core low voltage cable (cross-section 10-300mm ²), compliant with IEC 60502-2 and GB/T 12706 standards, designed specifically for building power distribution, industrial equipment, and renewable energy scenarios.

Suitable cable: 0.6/1kV five core low-voltage cable (3-core+neutral wire+ground wire), with a cross-section of 4-300mm ², in compliance with IEC 60502-2 and GB/T 12706 standards, designed specifically for building power distribution, industrial equipment, and renewable energy scenarios.

Suitable cable: 0.6/1kV dual core low-voltage cable (phase line+neutral line), with a cross-section of 4-300mm ², in compliance with IEC 60502-2 and GB/T 12706 standards, designed specifically for industrial equipment, rail transit signal systems, and renewable energy scenarios. Pre expanded silicone rubber sleeve (tensile ratio ≥ 600%), tightly wrapped around the cable by elastic shrinkage, suitable for irregular cross-sections

Compatible cable: 0.6/1kV three-core low-voltage cable (3 cores + neutral line), with a cross-sectional area of 10-400mm², conforming to IEC 60502-2 and GB/T 12706 standards, specially designed for building power distribution, rail transit and industrial equipment.