Suitable cable: 0.6/1kV single core low-voltage cable (phase line+neutral line), with a cross-sectional area of 10-300mm ², in compliance with IEC 60502-2 and GB/T 12706 standards, designed specifically for building power distribution, industrial equipment, and renewable energy scenarios.

Suitable cable: 0.6/1kV dual core low-voltage cable (phase line+neutral line), with a cross-sectional area of 4-300mm ², in compliance with IEC 60502-2 and GB/T 12706 standards, designed specifically for building power distribution, industrial equipment, and renewable energy scenarios.

Suitable cable: 0.6/1kV five core low-voltage cable (3-core+neutral wire+ground wire), with a cross-section of 4-300mm ², in compliance with IEC 60502-2 and GB/T 12706 standards, designed specifically for building power distribution, industrial equipment, and renewable energy scenarios.

The 10kV single core heat shrinkable intermediate joint is a connection component designed specifically for cross-linked polyethylene (XLPE) single core cables, suitable for cable systems with voltage levels of 3.6/6kV, 6/10kV, 8.7/10kV, and 8.7/15kV. Its core functions include sealing and waterproofing, insulation reinforcement, and stress control, especially suitable for flammable and explosive environments such as petroleum, chemical, and mining

Adapter cable: YJV/YJLV series three-core cable (section 25-400mm²), voltage class 10kV, in line with GB/T 18889 and IEC 60502-2 standards, designed for indoor scenarios such as substations and data centers. Electrical test: power frequency voltage 42kV/5min no breakdown, lightning impact voltage 95kV (GB/T 3048.8); Mechanical strength: Axial tensile strength ≥180N (IEC 61479), withstand the mechanical vibration of the switch cabinet (5-200Hz/3g acceleration). Compact design: the outer diameter is 45% smaller than the traditional porcelain sleeve (Φ85mm), suitable for KYN28A-12 switchgear; Intelligent identification: Preset red/yellow/green phase identification ring (according to IEC 60446), error rate is reduced by 98%.

The HSY-10 series covers indoor/outdoor terminals and intermediate connectors (models 1 # -4 #), compatible with 25-400mm ² three core cables, and has passed the dual certification of GB11033 and IEC 60502-4. It is designed specifically for scenarios such as power, new energy, and rail transit. Triple composite protection Waterproof: IP68 rating Stress control: Nonlinear conductive gradient layer Insulation: dielectric strength ≥ 28kV/mm (ASTM D149), temperature resistance -55 ℃~105 ℃.

Technical Summary of 10kV Three core Intermediate Joint Compatible cable: XLPE/PVC three core cable (cross-section 25-400mm ²), voltage level 10kV, in compliance with GB11033 and IEC 60502-4 standards. Core Technology: Stress control: Nonlinear conductive layer design, axial field strength gradient ≤ 1.2kV/mm (COMSOL simulation number # FEA2024-10kV); Waterproof sealing: IP68 protection (tested under 0.1MPa water pressure for 48 hours), self melting adhesive layer forms a radial pressure of ≥ 0.25MPa; Insulation strengthening: dielectric strength ≥ 28kV/mm (ASTM D149), temperature resistance -55 ℃~105 ℃. Performance verification: Mechanical strength: axial tensile strength ≥ 180N (IEC 61479), withstand 5-200Hz vibration (EN 61373); Environmental tolerance: Tested by 10% salt spray for 2000 hours (ASTM B117), resistant to UV aging for 2000 hours (shrinkage rate maintained ≥ 95%). Industry applications: Photovoltaic power station: HSY-10-3.3 type is used for the collection line of a 20MW power station, with zero faults for 3 years; Subway tunnel: The anti vibration model has passed the EN 45545-2 fire certification (smoke density<20%) and is suitable for humid environments. Service guarantee: Scan the QR code to trace the batch of raw materials and provide testing videos; Free cable cross-section matching tool and 3D installation guide provided.

10KV/20KV/35KV full voltage level heat shrink terminals and intermediate joints (including HSY-35-3.1 to 3.3 models), suitable for cable cross-sections of 50-400mm ², covering scenarios such as electricity, petrochemicals, and rail transit. IP68 waterproof (0.1MPa water pressure verification)+non-linear stress control (field strength ≤ 2.5kV/mm)+radiation cross-linked polyolefin insulation (dielectric strength ≥ 30kV/mm). Propane spray gun shrinks in 3 minutes, with an efficiency improvement of 65% compared to cold shrinkage technology; Weighing only one-third of the traditional porcelain terminal, it is suitable for small spaces such as switchgear and tunnels.